| 聯絡我們
   
 
返回
   
   
   
   


 
 

Rainline

   
It use a combination of a patented application technique and a specially developed high performance to create a raised profile by "imprinting" a pattern into molten thermoplastic and is highly visible under the wettest conditions.
 
Rainline is brighter than flat line (paint, thermoplastic, epoxy, preformed) and other types of profiled stripe, wet or dry. Because the reflector are protected from traffic. Rainline will retain a greater percentage of its initial reflectance mush longer than any other type of traffic stripe or pavement marking.
   
If a rumble strip effect is desirable, Rainline can be placed in a broken or audible pattern. Drivers will hear a loud rumbling noise when crossing or driving on Rainline stripes. By adjusting the distance invterval of the stripes, the rumble effect can be optimized for various posted speeds.
 
A specialist profile thermoplastic road marking product to maximize wet night visibility performance. The thermoplastic is applied by an extrusion or screed technique and immediately embossed to create a continuous pattern of inverted profiles on the road surface, as edge, lane line or centre line carriage marking.
   
The pattern applied to edge and centre line marking shall be such that the profiles are rotated slightly to the direction of on-coming vehicles.
   
Marking applied to lane separation lines may be angled or transverse to the axis of the line.
   
 
Copyright 2003 Kenny Engineering Co., Ltd. All Rights Reserved.